| The matching earrings for this bracelet are easy to make. They require 8 inches of 18 gauge wire and 8 inches of 22 gauge wire, both preferably 1/2 hard, 8 8mm beads, 2 2.5 or 3mm beads, two head pins and one pair of commercial ear wire findings. To make the matching earrings, begin by making four of the 2-1 wire components using the instructions from Page 2. Next you need to connect two of the 2-1 wire components using 8mm beads and the wrapped bead link. On one end of these connected 2-1 wire components you hang a bead dangle using a head pin and two 8mm beads separated by one 2.5 or 3mm bead. On the other end you attach one of your ear wire findings. Make two identical earrings. |
|
