  Alternative
Configurations:We have already discussed two alternative configurations for these earrings. The first alternative is to use the 1/2" Small Circular Wire Component or the 5/8" Small Circular Wire Component. The second alternative is to use an 8mm bead or a 6mm bead in the center of your bull's eye. If you get really ambitious, you could make an even smaller wire component so that you would have three concentric circles of wire with a bead in the center. To accomplish this alternative, we recommend using a 3/8" Super Peg for making the wire component and a 4mm bead for the center. We hope that you will find this jewelry making project to be "on target" with your tastes. (Sorry, but we could not resist this pun.) |