| The one slightly tricky part in completing these earrings
is that the three loop V shaped wire component is connected to the rest of
the earrings by wrapped bead links connected between the outside loops on
the three loop V shaped wire component to the loops in the middle of each
side of the five loop V shaped wire component. These wrapped bead
links are each made with about 2 1/2 inches of 22 or 24 gauge wire, and a
six mm bead centered between two 2x4mm bugle beads. This connection
is made, one side at a time, after the bead dangle is completed to the
center loop in the five loop wire component.
Once the above step is completed the earrings are finished by adding the bead dangles to the outside two loops on the five loop V shaped wire component and the the three loops on the three loop V shaped wire component. After completing all the bead dangles, add your ear wire and admire. You are done. |
 |