|
Step 11: Remove your wire and your pegs from your jig. We need to flip the design over and replace the pegs into your jig in the normal orientation. Position your pegs as shown below-left and place the wire back on the pegs as shown. Add a new peg for the next loop. Step 12: Wrap your wire about the new peg in the pattern as shown below-center. Step 13: Remove your wire and your pegs from the jig. Replace your pegs into the jig in the flipped position as shown below-right. Add one new peg to the pattern as shown. Replace your wire on the pegs as shown.
These jewelry making instructions continue on the following web page. |
