|
Alternative Designs (Continued):
Step 12: Finish making these earrings by connecting three
bead dangles to each of the bottom loops in the bottom wire component.
The earrings shown at left are made using essentially the same steps, but the ear wire is connected to the earring body by two spacer bars and a jump ring. The instructions for making the spacer bars can be found here. For the earrings shown at left, we used slightly shorter spacer bars. The two pegs to make these spacer bars were separated by two empty holes on a horizontal row of your jig. The pattern for the spacer bars can be viewed on this template. We hope you like these earrings. |
