Suzanne's Jewelry Wire & Beads Earrings -- A Jewelry Making Project -- Page 7

Step 22:  Wrap the wire around the next peg in the pattern as shown below-left.

Step 23:  You won't need to remove the wire from the jig in this step.  Just wrap the wire around the initial peg as shown below-right. 

Step 22	Step 23

Step 24:  Remove the wire from the jig and it should appear as shown below-left.

Step 25:  Using your flush cutter, cut the excess wire.  Use your bent chain nose pliers to close the final loop.  At this point you want to use your nylon jaw pliers to firmly squeeze the wire component in many different orientations.  Your finished earring body should appear as shown below-right. 

Step 24	Step 25