Page 8 of 15      Wire Jewelry Stands Jewelry Making Project

Step 7:  At this point we want to flip the wire over on the jig.  This is done by removing the jig and replacing it with the loop made on peg 2, now on peg 5 and the loop initially placed on peg 1, still on peg 1, but with the opposite orientation.  When this has been accomplished properly, the wire will appear as shown at right.  This step is done so that the two loops on pegs 2 and 5 will be mirror images of one another, making the finished jewelry stand symmetrical.

Step 8:  Now wrap the wire completely around peg 2 and continue to the point where the wire rests adjacent to peg 1 with no pressure applied.  When this is completed the wire will appear as shown at left.