Page 3         Diogenes Jewelry Wire Earrings with Beads Jewelry Making Project

Step 8:  Bend the wire against Peg 5 to form the bottom of the earring.

Step 9:  At this point we need to remove the wire from the WigJig Cyclops and flip it over.  Replace the wire on the jig in the mirror image position.  The wire should appear as shown below, left.  This step is done so that the loops on peg 4 and 6 will appear identical when viewed from the front.

Step 10:  Wrap the wire 1 1/4 turns around Peg 4. 

Step 11:  Bend the wire against peg 3.  The wire should now appear as shown below, right. 

Step 7

Step 8