Page 2         Wire Chandelier Earrings with Beads Jewelry Making Project

Step 2:  Make a loop in one end of each piece of wire.  Straighten all three pieces of wire. 

Step 3:  Position two pegs in your jig as shown at right.  Place the loop in one of the 3 inch segments of wire on the left most peg.  Wrap your wire round the second peg as shown above right.

   
Step 3

The WigJig Cyclops or Electra jigs are preferred for this pattern, but the pattern can be made on any WigJig.  If you use a WigJig Delphi, Olympus or Olympus-Lite you will need to position the pegs in a row separated by about 1/4 inch.

Step 5:  Add another peg and wrap your wire around this peg.

Step 6:  Repeat for the final peg and loop.  When completed the wire should appear as shown below, right. 
 

Step 4

Step 5

Step 6