|
Alternative Designs Continued: An earring with three
loops made on the WigJig Delphi is shown at right. The peg pattern
for this earring can be found below, left. A similar pattern would
also work on the WigJig Olympus or Olympus-Lite jig.
|
|
|
An earring made with four loops on the WigJig Delphi is shown at right. The peg pattern for this earring is shown below, right. Again, a similar pattern would work on the Olympus or Olympus-Lite jewelry making jig. For these earrings, the horizontal beaded wire component was made by hand without the jig. A final alternative to consider is to make the same earrings but replace the horizontal beaded segment with a bead dangle hanging from the loop at the top of the V shaped wire component. |
|
