Page 10      Flemish Spiral Jewelry Wire Earrings with Beads Jewelry Making Project

Alternative Design Continued:

Step 12:  Starting with a large Flemish Spiral wire component, begin making the necklace using 6mm beads and 22 gauge wire.  Make wrapped bead links to connect a section of commercial chain about 3/4 inch long with the Flemish Spiral wire component.  Instructions for making the wrapped bead link can be found here.  Add a second segment of commercial chain.  After adding the two segments of commercial chain, add one of the Flemish Spiral wire components. 

Step 13:  Repeat step 12, adding another two segments of commercial chain followed by a Flemish Spiral wire component.

Step 14:  At this point you will have one large Flemish Spiral as the center piece of the necklace and two chain segments made up of two segments of commercial chain and ending in a Flemish Spiral.  Now add five segments of commercial chain 3/4 inch long and held in place by wrapped bead links using four 6mm beads.  This will leave you with one side of the necklace about 14 inches long, ending in a segment of commercial chain.