| HOME JEWELRY MAKING INSTRUCTIONS WIGJIG UNIVERSITY NEWSLETTER GIFT IDEAS WIGJIG STORE |
| VIEW OUR BEADS BLING BOOKS CHAIN FINDINGS MISC SUPPLIES THREAD JEWELRY TOOLS WATCHES WIRE |
|
Step 1: Position eight metal pegs in the WigJig
Cyclops as shown at right. (Do not add the 5/16" Super Peg at this
time.) The pegs with (R) are used for the Right
Earring, the pegs with (L) are used for making the left earring. The
5/16" Super Peg is used for both left and right earrings, but will be
added later. Step 2: Now cut and straighten a 3" piece of 1/2 hard sterling silver, gold or gold-filled wire. |
|
|
Step 4: Remove the wire from the jig and add one or more beads. One 6mm crystal bead followed by one metal 2.5mm bead works well. Slide the beads onto the wire until they rest at the bend formed on peg 2R. |
|
Page 2 Next Page
Beads, Wire, Jewelry Making Tools and Jewelry Supplies by
WigJig Home
See our selection of beads, wire, jewelry
making suplies and jewelry tools.
IMPORTANT PRINTING INSTRUCTIONS
All content on this web site is copyrighted© by WigJig. Questions/Comments?
WigJig® is a registered trademark - Last modified: 09/04/2008
|