1. Cut two 5 inch pieces of .019 Clear Soft Touch bead stringing wire. 
2. Using a 2x2mm crimp bead, crimp the Soft Touch to one end of the Flemish Spiral.  The technique for completing a bead crimp is shown here. 
3. String an 8mm pearl on the Soft Touch, followed by a 1x2mm crimp bead.  Crimp the crimp bead closed.
4. Continue stringing seven 1x2mm crimp beads and eight pearls. 
5. After the eighth pearl, string a 2x2mm crimp bead and one side of the magnetic clasp.  String the Soft Touch back through the 2x2mm crimp bead.  Pull the clasp tight onto the Soft Touch and crimp the clasp onto the bracelet. 
6. Repeat steps 2 through 5 for the other side of the bracelet.
7. Connect a 2 1/2 or 3 inch segment of fine wire to one side of the magnetic clasp using either a small jump ring, or a split ring.  This wire will become the guard chain.
8. Connect the other side of the guard chain to the opposite magnetic clasp using the jump ring or split ring.
9. Enjoy the finished product!

Finished Bracelet