Tips for avoiding tarnish is sterling silver jewelry wire.
Minimizing Tarnish on Jewelry You Own:
Knowing that tarnish results from contact between sterling silver and chemicals in the atmosphere like chlorine and sulfur compounds we can easily identify a way to avoid tarnish. The most simple way is to avoid contact between your sterling silver and the atmosphere. Obviously, it would be a little difficult to only wear your sterling jewelry in a vacuum. It would also be a little hard on the health of the wearer. So we have to investigate other options. The first is rather obvious and very simple -- store your sterling silver jewelry in an airtight container. Zip lock bags and jewelry boxes can minimize contact between the chemicals in the atmosphere and your jewelry. We like clear lid jewelry boxes because they allow you to view your jewelry, but still minimize contact with the chemicals in the air.
The second thing that you can do is to use chemistry to help with the problem by adding anti-tarnish strips to your jewelry box or zip lock bag. These strips have chemicals in them that capture the sulfur and other chemicals in the air that cause tarnish. They are very effective at minimizing tarnish that could occur while your jewelry was being stored and not worn.
The above two steps are very effective in minimizing tarnish during the time when your jewelry is being stored. On the following page we will discuss alternatives that can minimize tarnish while you are wearing your jewelry.
Now we need to address how to minimize tarnish while you are wearing your jewelry. When you wear your jewelry it is exposed to chemicals in the air and to chemicals in the oils in our skin. Both can cause tarnish. The answer to minimizing this tarnish is to stop contact between the jewelry and these chemicals. This sounds like it would be hard to do, but actually it is not. The way we avoid contact between chemicals and your jewelry is by using another chemical similar to wax. If we coat our jewelry in a thin wax like compound, it will prevent contact between the bad chemicals and your jewelry. The way we do this is rather simple. Many polishing cloths have an anti-tarnish compound impregnated in the cloth. This anti-tarnish compound works just like wax in that it coats your sterling silver so that it can't come in contact with the air. Many polishing cloths have agents that remove tarnish either by physically scraping it off, or chemically by reacting with the tarnish itself to form a new molecule that is easy to remove. Some polishing cloths have these polishing agents and the additional anti-tarnish agent that minimized tarnish while the jewelry is being worn. We suggest that you will want to get a polishing cloth that has both polishing and anti-tarnish features.
These first two pages discussed ways to minimize tarnish after your jewelry has been made. In the following paragraph, we will discuss things to do while you are making your jewelry that will help minimize tarnish.
Minimizing Tarnish While Making Your Jewelry:
When is the best time to take measures to minimize tarnish in your jewelry? The answer is simple, when you are making the jewelry. What can you do? Again the answer is again relatively simple, you need to do something to prevent the chemicals in the atmosphere and in our skin from contacting the copper and silver atoms in the sterling silver wire. How do we to that? Currently there are two basic ways. The first way is to purchase wire that has a coating that prevents the atmosphere from contacting your wire. At present there are very few options for this in sterling silver, but we do have an option in silver-plated wire. The Artistic Wire Natural Silver, silver-plated wire has an enamel coating on the wire to minimize tarnish. This clear coating prevents any external chemicals from contacting the wire as long as the coating is maintained (not scraped off). Jewelry made with this wire will resist tarnishing for a very long time, but the enamel coating on the wire is vulnerable to exposure to ultra-violet light and will turn slightly yellow after many years of exposure. This is a very good solution, but not a perfect one.
The second thing that one can do while making your jewelry to minimize tarnish is also simple. Before using your sterling silver wire to make a jewelry item, polish the wire with an anti-tarnish polishing cloth. Polishing first, places the anti-tarnish coating over the entire surface of the wire and not on just the outer surfaces of your finished piece. This is a very simple but very effective approach. Coat your sterling silver wire with the anti-tarnish wax-like coating from the polishing cloth before you begin bending it into shape for use as jewelry.
Removing Tarnish Using Chemical Baths:
Jewelry that is tarnished can be cleaned and shined by soaking it in chemical baths. These baths are very effective ways for removing tarnish, but is should also be noted that they can also remove the microscopic bits of silver or copper that reacted with the chemicals in the air to product the tarnish. Over an extended period of time the surface of the sterling silver can actually become visibly pitted as some of the copper is removed. We don't recommend this approach because it can damage your silver over time.
Anti-Tarnish Argentium Sterling Silver:
The ultimate and best solution for this problem is now available. It is a new sterling silver alloy called Argentium sterling silver. This wire is a patented alloy consisting of 92.5% silver, about 5.9% copper and 1.6% germanium. The tarnish resistance of this silver alloy stems from the fact that germanium combines with elements in the air to form a clear compound that coats the wire. This germanium compound prevents the sulfur compounds in air pollution from coming in contact with the silver or the copper in the wire and for this reason prevents the formation of the dark tarnish that results from contact with sulfur compounds. When this new Argentium sterling wire does tarnish, the tarnish is a light yellow in color and can easily be removed with a soft cloth and soap and water. Furthermore, this new sterling silver alloy can be soldered and heated just like "old" sterling silver. We really believe that this new alloy of silver is going to take over the jewelry markets. Within the next five years, our opinion is that the market for "old" sterling silver will slowly dry up as it is replaced by this new Argentium sterling silver. Wire using this new sterling silver alloy is now available in our WigJig Internet store. We call it Anti-Tarnish SS.